Comes With Bearings & Pivots for Strain 10” Wheel Face – 13/16” Rim Thickness $2,900/Each
|
36" WIDE X 17 1/2" DIAMETER EACH END X 8" DIAMETER CENTER
- 8 FLUTES - 2 15/16" SHAFT - 10" LONG & 6" LONG - ROLL IS FABRICATED FROM 5/8" THICK MILD STEEL PLATE - 11 ROLLS TOTAL
(11) Rolls $495.00/ea. = $5,445.00 PACKAGE PRICE
|
24” Diameter x 38” Wide - 3 7/16” Shafts - With Rex H. D. Roller Bearings & (1) 45 tooth – RC – 120 Sprocket $600/Each
|
Model 143TC – 1 HP - 1725 RPM
|
Model 143T – 1 HP – 1725 RPM
|
Model 145TC - 1.5 HP – 1725 RPM
|
Model 284 – 10 HP – 1740 RPM
|
Model 215T – 10 HP - 1755 RPM
|
Model 215T – 10 HP – 1730 RPM
|
Model 284T – 15 HP – 1175 RPM
|
Model 284T – 15 HP – 1165 RPM
|
Model 254T – 15 HP – 1775 RPM
|
Model 8155 – 150 HP – 1180 RPM
|
Model 284T – 18-1/2 HP – 1765 RPM
|
Model 145T – 2 HP – 1725 RPM
|
Model 256T – 20 HP – 1755 RPM
|
Model 445T – 200 HP – 1780 RPM
|
With Double Auger’s/Powered Anti-Bridging System & gear reducers . Includes: (1) Material assist shakeout mounted on the bin sides, catwalk and man ladder.
|
Model 182T – 3 HP – 1750 RPM
|
Model 182T – 3 HP – 1730 RPM
|
Model 213T – 3 HP – 1170 RPM
|
Model 215T - 3 HP – 865 RPM
|
Model 286T - 3 HP - 1770 RPM
|
Model 215T - 3 HP – 870 RPM
|
|
|
Model 286T – 30 HP – 1750 RPM
|
Model 286T – 30 HP – 1755 RPM
|
Model 449T – 300 HP – 1765 RPM
|
Model 324TC - 40 HP – 1770 RPM
|
Model 324T - 40 HP – 3560 RPM
|
Model 324T – 40 HP – 1760 RPM
|
Model 324T - 40 HP – 1760 RPM
|
Model 215T – 5 HP – 1165 RPM
|
Model 184T – 5 HP – 1715 RPM
|
Horizontal 5’ CAE High Strain - Setting Type – Mark II – S/N 311-84. Includes: 125 HP – TEFC – 1175 RPM Motors – Fixed Guides - 9” Wide Wheel Face – ¾” Side of wheels –19,000 lbs. Strain - Infeed roll case 20’ Long With Cant//Board Turners - 10-1/2” Diameter x 36” Wide - Inertia Outfeed Separating System – Four (4) Way – Approximately 20’
|
Model 326T - 50 HP – 1760 RPM
|
Model 326T - 50 HP – 1770 RPM
|
Horizontal 6’ CAE – High Strain – Setting Type - S/N: 71-87 – With Tempo Sonic Setting Cylinder & 5 Gallon Accumulator. Includes - 150 HP – TEFC - Drive Motor - Hydraulic Powered Roll Case - 15’ Overall Length with 10 Rolls 8” x 32” Wipe - Heavy Duty Sub - Base (10” Wide Flange Beam 8’ to base) - (4) Spare Blades & Manuals. Idler Wheel is 1” @ Rim – Drive Wheel is ¾” @ Rim . Note: Machine is offered without (HPU) Hydraulic Power Unit.
|
Model 231TC - 7.5 HP – 1750 RPM
|
Model 213TC - 7.5 HP – 1750 RPM
|
Model 254T - 7.5 HP – 1155 RPM
|
48’ Overall Length – Single 12” Diameter – 14” Lead (Flight Spacing)
- Includes: - Toshiba Gear Reducer - 10 HP – TEFC Motor & Shaft Mounts – 15:1 Ratio - Belt Driven.
|
IMW Dual Sides - Babbit Resurfacer- 21” Diameter – Cutting circle disk – Variable speeds – Shop tested.
|
30:1 Ratio – 2.81 HP Rated
|
30:1 Ratio – 2.81 HP Rated
|
Brook Hansen – With Brook Hansen 7.5 HP TEFC Drive Motor
|
Brook Hanson Reducer – Brook Hanson 7.5 HP – TEFC Drive Motor
|
Shop Built - With Flights – 32’ Overall Length x 11” Wide x 8” Deep – 3/16” Formed Pan with Return – 81- X – H.D. – Chain Flights every four pitches. Includes: Reliance – 5 HP – 1800 RPM – 230/460 Volt – 3 Phase – TEFC Motor – Drive Belt to a Shaft Mount- Dodge Gear Reducer – 23:45 Ratio
|
(1) Roll – Approximately 250' x 24" Wide - Chevron Type – Smooth Back - Approximately 5/16” Thick – 4 ply - $5.00 / foot.
|
18’ Overall Length x 26” Wide – Screw is 15’ Long x 18 “ Diameter – 18” (Screw Flight Spacing Per Revolution) Includes: - 3 HP – 1800 RPM –TEFC Westing House Motor – 230/460 Volt – 3 Phase – Belt Drive to Shaft Mount – Dodge Speed Reducer– TXT6251 Type - 25.13:1 Ratio
|
Model TDT825 – - Shaft Mount - 24:62 Ratio – 68 HP Rated - 3 7/16 Taper lock bushings - 3 Groves 3V -
Sheave 25" Diameter
|
Model TXT725AT – Shaft Mount - 24:59 Ratio – 72.3 HP Rated - 3 15/16 Taper lock bushings - 3 Grove 3V drives - 18 1/2" Sheave
|
Model TDT625 – 25.13.1 Ratio – 32.8 HP Rated
|
10 1/2" Dodge Reducer – Shaft Mount - Model TDT825 – 24:01 Ratio – (68 HP Rated) - 3 15/16” Taper lock bushings - Premium E-III Toshiba – TEFC Motor - 20 HP – 5 Grove 3V drives - 5 1/2" motor - Belt Drive.
|
10" Dodge Reducer – Shaft Mount - Model TXT625T – 25:13:1 Ratio – (38 HP Rated) 3 7/16 Taper lock bushings - 5" Seimans Allis - 15 HP - 1760 RPM- 3 Grove - 3V – Model 254 T - TEFC Belt Drive
|
Dodge Reducer – Shaft Mount - Model TDT625 - 25.13.1 Ratio (32 HP Rated) - 3 7/16 Taper lock bushings - Toshiba - TEFC Drive Motor - 15 HP - 1775 RPM - Premium EFF- Equip III - Belt drive 3 Grove - 3V - 3 1/2" Drive sheave - 5" Driven sheave
|
|
|
70:6:1 Ratio – 20 HP Rated
|
8' Wide x 6' Deep - Model FHC-72 - S/N 101-A - Removed from a cat 980-F and should fit any cat model 980.
|
General Electric Motor – 32.01:1 Ratio - (3 HP Rated) General Electric - 3 HP – TEFC Drive Motor.
|
General Electric – 9.30 Ratio – 2 HP Rated – General Electric 2 HP TEFC Drive Motor
|
Wester Pneumatics, Inc - Item: B-485 - Model: 1230-6111 - SN: A-236816 - Rotation: CW - Comes with 17” 5 Grove & 8V Shive
|
(20,600 lbs.) Hurst Boiler System - 1988 Model - 300 PSIG trimmed to 150 PSIG - S/N: YB-4000-300
System includes: System Includes: Hog fuel reclaim area 40’ x 50’ x 20’ - Twin Overhead Re-claim Ratchet Driven #124 With Flights On 5’ Centers - (2) Tulsa winches – 20 HP hydraulic power unit - Vibra – Pro Vibrating Conveyors – 42’ Long - Receives Material From The Reclaim Area – (2) More Vibra – Pro Vibrating Conveyors (1) 28’ Long & Another 24’ Delivering Hog Fuel To The Boiler - Reclaim building - all steel – Graco building Spokane, WA. Job # 88258 - 58’ x 62’ 44’ high side – 34’ low side - Boiler building – all steel – Garco building systems – Spokane, WA Job # 88214 – 42’ x 56’ x 35’ eve height. - Engineering drawings & technical information is available. - This system is located in norther Idaho & is still installed. - Boiler was decommissioned approximately 5 years ago. - Well preserved - and will need new updated electrics. - As is where is – Subject to prior sale
|
10 HP – TEFC Motor - 230/460 Volts – 18” Front to Back - 30” Length - 16” High
|
TEFC - 3 Phase Motor - 1755 RPM - Dan Foss - L38-70-53 Pump with Heat Exchanger – 18” Length – 24” High – 10” Deep And 52” Front to Back - 34” Length – 16” High
|
TEFC 3 Phase Motor - 1740 RPMS – Dan Foss - L38-70-53 Pump with Heat Exchanger – 18” Length – 24” High – 10” Deep And Tank 54” Front to Back – 41” Length – 19” High
|
3 HP - TEFC 3 Phase Motor - 1740 RPM – With pump - 16" Front to Back - 36" Long -16" High
|
30 HP - TEFC Motor - 1750 RPM – 230/460 Volt - Flooded Suction Pump -Tank Return Filter - 18” Front to Back - 30” Length - 22” High
|
7-1/2 HP - TEFC Motor - 230/460 Volts - With PVB Pump Filter and Heater - 25” Front to Back - 36” Length - 20” High
|
Tank Only – 36” Front to Back – 30” Length - 12” High
|
12,000 lbs. Hyster forklift – model 110-e – (missing s/n) – in line 6 cylinder general motors gas engine – 32 x 12 – 15” drive tires – monotrol transmission – open cab – side shift – 7” wide x 46” long forks – 48” wide carriage – 10’ 4” mast height - older machine
|
23,000 lb hyster forklift – model 230 xl-2 – s/n e007do2417s – 6 cylinder perkins diesel – monotrol 3 speed transmission – enclosed cab – side shift & swing – 16” wide x 52” long forks - 10:00 x 20 duals-13’ 2” mast height – 7’ 9” carriage width - approximate weight 28,000 lbs.
|
23,000 lbs. Hyster Forklift – model 230 xl-2 – s/n e007do2114r – 6 cylinder Perkins diesel – monotrol 3 speed transmission – enclosed cab – side shift & swing – 12” wide x 47” long forks -10:00 x 20 duals – 14’ 6” mast height – 7’ 9” carriage width - approximate weight 28,000 lbs.
|
8,000 lbs. Hyster forklift – model h-80-e – s/n doo5do3938g – general motors v-6 propane engine – Monotrol transmission – open cab – 7:50 x 15 dual tires (MITCO solid solver) – side shift – fork positioners – 6” wide x 48” long forks – 60” wide carriage – 9’ mast height -169” maximum load height – approximate weight 13,100 lbs
|
15,000 lbs. Hyster forklift – model -h-155 xl2 – s/n foo6ao3463k – 4 cylinder Perkins diesel – Monotrol transmission – enclosed cab – side shift & swing – 8:25 x 15 duals – 12” wide x 50” long forks – 60” wide carriage – 10’ 6” mast height - 173” maximum load height – approximate weight 19,100 lbs.
|
47:1 Ratio – 17 HP Rated – 1750 RPM
|
10,000 lbs. kd/Manitou forklift – model 450 cp – s/n 165033 – (2001 mfg. date) four wheel drive – Perkins 4 cylinder diesel – four speed manual transmission – enclosed cab - side shift – front drive tires are 1200r24 – steer tires 12r x 16.5 – 10” wide x 53” forks – 60” wide carriage – 10’ 6” mast height - maximum lift height 177” – weight 18,000 lbs.
|
Model No: CCW65A - Serial No: 12369 - With Search Coil 47” long x 19” front to back x 6” Deep
|
Vibrating Conveyor – Mill Power (Balanced) Syncro – Coil – 35’ Overall Length – 36” Across the Top X 16” Across the Bottom – 16” Deep – Includes:
5’ Metal Detector Section – 5’ Dust/Fines Shakeout (1” Offset Holes – Right Hand Discharge) & 10’ Impact Section – 10 HP – TEFC Drive Motor. - Conveyor was feeding an 84” Slant Disk Black Clawson Acrowood Chipper.
|
Vertical frejoth - model fvtm - 1 ½ - s/n 4589 – 2 hp - 220 3 phase - spindle speeds 8 - to 5440 – r-8 tool holder with collets – pathfinder - 5 digital readouts x & y – 9” x 42” “t” slotted table with hold downs. - Very good to excellent condition.
|
One Montgomery punch and Die hog - 21’ X 34’ Infeed opening - Top feed - Bottom discharge - With direct coupled - GE Motor - 172 HP - 1180 RPM - 460 Volt - ODP - Ellison replaceable bolt in knives - With flywheel - Includes heavy duty sub - Base 10 ½’ wide x 15’ long - Legs are 6’ high - 12’ WF beams - Metal grating with handrails - Infeed Chute is 8’ x 3’ x 3’ - Fabricated from ? steel - Discharge is to 24’ blow pipe - Machine is in very good condition.
|
Feed Module – 35” Diameter - Scissor Type - Includes:
(2) Centering Rolls – 36” Diameter x 39” Wide - 120 Roller Chain Drive - Grizzly Gear Reducer and Hydraulic motor – 6:1 Ratio
|
NICHOLSON 22” – MODEL A5B – S/N 243-7121 – MFG DATE 2000 - LEFT HAND – REMOTE TOOL PRESSURE – AIR SEAL RING - INCLUDED: - 100 HP RING DRIVE MOTOR - 40 HP FEEDWORKS DRIVE MOTORS - SM CYCLO 11:1 REDUCER - OPERATORS CONTROL COUNSOL - RING AND FEEDWORKS LUBE PUMPS. - Note: ALSO AVAILABLE IS A 22” ROTOR WITH CAPTIVE AIR SYSTEM.
2000
|
22” MODEL A5 – S/N 5899 – MFG DATE 1989 – RIGHT HAND – REMOTE TOOL PRESSURE – AIR SEAL RING. - INCLUDED: - 100 HP RING DRIVE MOTOR - 40 HP FEEDWORKS DRIVE MOTORS – SM CYCLO 11:1 REDUCER - OPERATORS CONTROL COUNSOL - RING AND FEEDWORKS LUBE PUMPS. - ALSO AVAILABLE IS A 22” ROTOR WITH CAPTIVE AIR SYSTEM
1989
|
NICHOLSON 35” – MODEL A-5 – S/N 6157 – Left HAND – REMOTE TOOL PRESSURE – AIR SEAL RING. INCLUDES: - 125 HP RING DRIVE MOTOR – 50 HP FEEDWORKS DRIVE MOTORS – OPERATORS CONTROL COUNSOL– RING AND FEEDWORKS LUBRICATION PUMPS.
|
NINE (9) – SOLD AS A SET – 30” SHELL OUTSIDE DIAMETER – 34” OUTSIDE THE FLUTES (END) – 8’ 4” CIRCUMFERENCE –(CENTER OF ROLL) 36” OVERALL WIDTH – 8 FLUTES
|
Paco Pump – 90 GPM – 200 TDH – 8.25 Diameter - With Baldor Motor - 15 HP – 3650 RPM
|
Paco Pump – 90 GPM – 200 TDH – 8.25 Diameter - US Electric Motor - 10 HP – 3490 RPM
|
Paco Pump – 90 GPM – 200 TDH – 8.25 Diameter - Baldor Motor - 10 HP – 3450 RPM
|
Paco Pump – 100 GPM – 200 TDH – 7.1 Diameter - With 10 HP Motor
|
Paco Pump – 40 GPM – 75 TDH – 8 Diameter - With US Electric Motor - 3 HP – 1750 RPM
|
Paco Pump – 100 GPM – 180 TDH – 6.8 Diameter - Paco Motor – 7.5 HP – 3470 RPM
|
Paco Pump – 90 GPM – 200 TDH – 8.25 Diameter - US Electric Motor – 7.5 HP – 3525 RPM
|
Paco Pump – 7.1 Diameter - With Motor
|
Paco Pump – 100 GPM – 7.1 Diameter - With Toshiba Motor – 20 HP – 3470 RPM
|
Mono Type – Without Hydraulic Power Unit - Located in Meridian, Idaho - $24,900 loaded on truck
|
Manufactured by Vacuum Engineering – (Vec - loader) Spartan Model - 0724 - S/N: 038 – Includes: - (4) Cylinder Ford Industrial Engine (Propane) – Roots Rotary Vacuum Pump.
|
Precision (Non Balanced) 22’ Long x 18” Wide x 8” Deep – 3/16” Pan Thickness – With 5’ Fiberglass Metal detector Section – 5 HP – TEFC (Mfg. Name?) Drive Motor – S/N: 20-18-8 (V-616) Set Up to Feed a 58” Precision Chipper.
|
QUINCY 5 HP - TWO STAGE AIR COMPRESSOR - MODEL VE-325-80 - S/N 5021818 - 80 GALLON VERTICAL TANK - 3 PHASE TEFC MOTOR
|
25 HP –ROTARY SCREW AIR COMPRESSOR – MODEL F-25N-240 – S/N 9502410 – 25 HP TEFC MOTOR – 460 VOLT – 3 PHASE – MONTED ON A 240 GALLON RECEIVER TANK – 1994 MODEL
|
30" WIDE X 12' 6" LONG – (15) SCALPING ROLLS. Includes: 7 1/2 HP BALDOR SUPER EFFICENT - TEFC DRIVE MOTOR TO A REX VENUS PLANET GEAR REDUCER - 73 RPM OUTPUT - #100 DOUBLE SINGLE DRIVE. Spare Rolls
|
25” x 30” - S/N: 3240 - 12” Injection T - Comes with a Sub-Base - Includes: Toshiba Motor - HP: 7.5 - Type: IKKH - RPM: 1750 - Amp: 18.6/9.3 - Type: TEFC - Belt Driven to a Dodge Gear Shaft Mount Reducer - Size: TXT525CT - Ratio: 25.56-1
|
Sew Euro Motor – 29:1 Ratio (50 HP Rated) With Sew Euro-Drive
|
Sew Euro Motor - 29:1 Ratio (58 HP Rated) With Sew Euro-Drive.
|
11:1 Ratio - 48.5 HP Rated
|
11:1 Ratio – 8 HP Rated – 1750 RPM
|
SET OF TWO (2) – DRIVER AND IDLER – DRIVER IS 9 TOOTH 110 CHAIN - WITH 3 15/16” SHAFT – AND REX HD BEARINGS – TWO SMOOTH IDLER ROLLS – MOUNTED ON A 3 15/16” SHAFT – SET UP FOR 36” WIDE FLIGHTED CONVEYOR
|
TWO (2) DRIVER AND IDLER – FOR 110 CHAIN CONVEYORS - DRIVEN SPROCKET IS TWO # 110 SPROCKETS MOUNTED ON A 3 15/16” SHAFT REX HD BEARINGS AND INCLUDES 36 TOOTH 120 ROLLER CHAIN SPROCKET – IDLER IS DUAL 11 TOOTH MOUNTED ON A 2 15/16” SHAFT – SET UP FOR A 26” WIDE TROTHING CONVEYOR.
|
4" x 2" Tube Construction – With Wheels. PRICE: $125/each.
|
Model #: 4236-BDAX - PH: 3 - SN: 74636 & 74637 - Includes: Tank Size: 12” Wide x 17” Length x 14” High - 1 ½ Discharge Ball Valve with Back Flow - 2 General Electric Starters - 1 ½ Intake Valve - Motor - HP: ¾ - RPM: 3450 - SN: W9-93 - Volts: 460 - Frame: 56J - AMPS: 3.2-3/1.5 - HZ: .60.
|
Model #: 4236-BDAX - PH: 3 - SN: 74636 & 74637 Includes:
Tank 12” Wide x 17” Length x 14” High - 1 ½ Discharge Ball Valve with Back Flow
2 General Electric Starters - 1 ½ Intake Valve - Motor - HP: ¾ - RPM: 3450 - SN: W9-93
Volts: 460 - Frame: 56J - AMPS: 3.2-3/1.5 - HZ: .60
|
Sulzer Pump – 40 GPM – 110 TDH – 5.13 Diameter - Baldor Motor - 3 HP – 3450 RPM
|
6” high x 24” wide x 90’ overall length – Feeding material to the surge bin – Order #: 10-2125-04 – S/N: BF-1579 – With gear reducer.
|
8" x 20" x 45' - Flight Type – Order #: 11–2 165–01 – S/N: BF – 1647 – Model 8 x 24 Bulk Flow – Customer Order #: 114762 - ID #: CV430 – Includes: Falk Shaft Mount - Gear Reducer – 25:1 Ratio.
|
Model 250W – S/N 63J10021507 – Cubing machine with 300 HP - Toshiba motor – 1780 RPM – TEFC – Marine Duty – 449 – TZ Frame – Premium EQP – 840 – Planet gear reducer - 17.21 – 1 Ratio – 300HP rated – Mounted on a common sub – Base.
Warren & Baerg mixing chamber – S/N: 15H10021502 – 12’ overall length x 24” Diameter – with gear reducer.
Warren & Baerg twin screw metering auger - 48” long x 10” Diameter screws – With gear reducer.
Electrics:
Operators Control Console
Siemens Main - Reduced Voltage Motor Starter – Rainproof Enclosure – 600 Volts AC - Cat #: HF366R
Allen Bradley SMC Flex 150-F480 FBD – HP: 400 - Series A – 120 Volts Control - Cat #: 150-F480FBD
Note: Warren & Baerg Factory has rebuilt Dies and Head Assemble “(0) Hrs. since rebuild.
|
S/N: 53H10021497 – Twin 14” Augers – 6’ Overall Length. Includes: Sew Euro Drive Gear Reducer – 7 1/2 HP – 47:1 Ratio - Chain Drive to Augers – 30" x 20" Infeed Opening – 24" x 24" Discharge.
|
20:1 Ratio – 1 HP Rated – 1800 RPM
|
Model: F230 - SN: 1S1323 – Max. Pressure: 125 – Size 6/6 x 2 ¾ – Essick MFG CO. – 2 Stage. Includes -
10 HP - TEFC Toshiba Motor - 1730 RPM – Model 215T – 26.8/13.4 AMPS - 3 Phase
|